Production Info Hud v 1.1
63
téléchargements
243.81 KB
taille des fichiers
0
commentaires
1
vidéos
1
mises à jour
par
admin
il y a 4 mois
0/5,
0
votes
Dernière mise à jour
dernier site
Version
v 1.1
il y a 2 semaines
HUD display for husbandries and productions that need care.
A list of the husbandries and products is shown.
The remaining time is used to order the list.
It displays the amount of time until an output storage is full as well as the amount of time until a source material is empty.
Only the husbandry itself is supported; feeding robots are not.
Instructions for general mouse operation Click the arrow symbol in the upper left corner to move the window. Click the down arrow in the upper left corner to open the filter line.
Use the gear wheel located in the lower left-hand corner to adjust the filter line. You may adjust the font size and line spacing separately in the settings. The lock in the bottom left corner will only automatically appear when the mouse is pressed. You can also use the arrow icon in the bottom right-hand corner to change the window's size. To filter the list based on a production site or fill type, left-click on it. Save changes using the disc in the upper right-hand corner. After that, the filters in the filter line are disregarded. The filtered content is then shown in green. The filter may be removed by clicking on the filtered item once again.
To move between remaining time, capacity (available capacity for raw materials and utilized capacity for produced items), and current hourly production amount, right-click on the production site to open it in the menu.
Note: You must move the mouse pointer over the appropriate location for some of the icons to appear.
You may access the display system settings by right-clicking on the spanner symbol next to the current assets in the top display.
For any mod that makes use of this display technology, they are the same. Among many other things, you may store the settings here automatically.
Take a peek.
Changelog: +
1.1.0.0 – Added FR and PL translations – Fixed arrow display – Improved full and empty display – Filtered outputs assigned to distribution – Adjusted production per hour in the display for more than one day per month – Updated HL display system
Thanks to Achimobil
A list of the husbandries and products is shown.
The remaining time is used to order the list.
It displays the amount of time until an output storage is full as well as the amount of time until a source material is empty.
Only the husbandry itself is supported; feeding robots are not.
Instructions for general mouse operation Click the arrow symbol in the upper left corner to move the window. Click the down arrow in the upper left corner to open the filter line.
Use the gear wheel located in the lower left-hand corner to adjust the filter line. You may adjust the font size and line spacing separately in the settings. The lock in the bottom left corner will only automatically appear when the mouse is pressed. You can also use the arrow icon in the bottom right-hand corner to change the window's size. To filter the list based on a production site or fill type, left-click on it. Save changes using the disc in the upper right-hand corner. After that, the filters in the filter line are disregarded. The filtered content is then shown in green. The filter may be removed by clicking on the filtered item once again.
To move between remaining time, capacity (available capacity for raw materials and utilized capacity for produced items), and current hourly production amount, right-click on the production site to open it in the menu.
Note: You must move the mouse pointer over the appropriate location for some of the icons to appear.
You may access the display system settings by right-clicking on the spanner symbol next to the current assets in the top display.
For any mod that makes use of this display technology, they are the same. Among many other things, you may store the settings here automatically.
Take a peek.
Changelog: +
1.1.0.0 – Added FR and PL translations – Fixed arrow display – Improved full and empty display – Filtered outputs assigned to distribution – Adjusted production per hour in the display for more than one day per month – Updated HL display system
Thanks to Achimobil
HUD display for productions and husbandries that require attention.
The productions and husbandries are displayed in a list.
The list is sorted by remaining time.
It shows both the time until a raw material is empty and until an output storage is full.
Feeding robots are not supported, only the husbandries themselves.
General operating instructions with the mouse
– Move window by clicking on the arrow icon in the top left corner
– Open the filter line by clicking on the down arrow in the top left-hand corner.
– Switch filter line to settings via the gear wheel in the bottom left-hand corner
– The font size and line spacing can be set individually in the settings
– Automatically display only when mouse is activated via the lock in the bottom left corner
– Adjust the window size using the arrow icon in the bottom right-hand corner
– Save changes via the disc in the top right-hand corner
– Left-click on a production location or a fill type to filter the list according to this. The filters in the filter line are then ignored. What is filtered is then highlighted in green. Clicking on the filtered item again removes the filter.
– Right-click on the production location to open it in the menu
– Left-click on the 3rd column to switch the display between remaining time, capacity (available capacity for raw materials and used capacity for manufactured goods) and current hourly production quantity.
Note: Some of the icons are only displayed when you move the mouse over the corresponding position.
In the upper display next to the current assets, you can right-click on the spanner icon to call up the display system settings
These are the same for all mods that use this display system. Here you can save the settings automatically and much more.
Just have a look.
Credits:
Achimobil
The productions and husbandries are displayed in a list.
The list is sorted by remaining time.
It shows both the time until a raw material is empty and until an output storage is full.
Feeding robots are not supported, only the husbandries themselves.
General operating instructions with the mouse
– Move window by clicking on the arrow icon in the top left corner
– Open the filter line by clicking on the down arrow in the top left-hand corner.
– Switch filter line to settings via the gear wheel in the bottom left-hand corner
– The font size and line spacing can be set individually in the settings
– Automatically display only when mouse is activated via the lock in the bottom left corner
– Adjust the window size using the arrow icon in the bottom right-hand corner
– Save changes via the disc in the top right-hand corner
– Left-click on a production location or a fill type to filter the list according to this. The filters in the filter line are then ignored. What is filtered is then highlighted in green. Clicking on the filtered item again removes the filter.
– Right-click on the production location to open it in the menu
– Left-click on the 3rd column to switch the display between remaining time, capacity (available capacity for raw materials and used capacity for manufactured goods) and current hourly production quantity.
Note: Some of the icons are only displayed when you move the mouse over the corresponding position.
In the upper display next to the current assets, you can right-click on the spanner icon to call up the display system settings
These are the same for all mods that use this display system. Here you can save the settings automatically and much more.
Just have a look.
Credits:
Achimobil
Vidéos
Télécharger les fichiers de la dernière version
Version: v 1.1Mise à jour de: il y a 2 semaines
Taille totale: 243.81 KB FS25_ProductionInfoHud_fs25planet.zip direct télécharger · 243.81 KB · ajouté il y a 2 semaines
Vous pourriez également aimer »
_fs25planet.webp)
_fs25planet.webp)
_fs25planet.webp)
0 Commentaires
Il n'y a pas de commentaires. Soyez le premier à commenter !