
Fendt 700 with Agribumper v 1.0.8
225
téléchargements
29.64 MB
taille des fichiers
0
commentaires
0
vidéos
4
mises à jour

par
admin
il y a 4 mois
5/5,
1
votes
Changelog
dernier site
Version
v 1.0.8
il y a 6 jours
Adjustable Agribumper weight: 400–1800 kg
The primary color may be changed. Fendt+Agribumper Color-Customizable Rim
Agribumper: customizable color
Drive lights and a speed camera
Initial costs
Changelog: 1.0.8.0 version
The mod has two versions: Physics and Standard
Configurations:
NEW: Rear fender warning signals
NEW: RUL both left and right
NEW: Three-point hitch cable in front
NEW: Roof surveillance
NEW: Three different types of wheel weights (internal 1000 kg, outside 2000 kg, and inside and outside 3000 kg)
NEW: You may choose your wheel weight color.
NEW: Illuminated floor mat
NEW: Precision farming using plant sensors
Interactive Management:
NEW: Full internal and external integration with 55 IC points
Front and rear manual attachment via the "X" IC point
Lower front axle with IC on the front axle, within the PTG controller, and on the roof monitor
Front axle, steering wheel, light switch, and door sounds
The front fender
For Hide, Agribumper
Keep the hood guard rope hidden.
Animations:
NEW: When changing directions, the drive lever now shifts to the left.
NEW: When braking and accelerating, the drive lever now moves (foot pedal disabled).
NEW: When cruise control is engaged, the drive lever now shifts to the right (only via IC).
NEW: When stationary, the steering column's handbrake lever shifts to "Park," and when moving, it shifts to "Released."
NEW: When changing directions, the steering column's direction lever moves.
NEW: An animated joystick for front loader control
NEW: The steering wheel folds up.
NEW: Warning signs that fold in
NEW: Include RUL.
NEW: Armrest monitor that rotates; NEW: retractable roof monitor
NEW: Change to dark mode
Adjustment for physics: (just for the shop's physics version)
NEW: The seat suspension has been changed; an inside camera has been installed on the seat.
NEW: Chassis dampers and springs have been tweaked
NEW: Repositioned center of gravity
NEW: Adjusted suspension for the cabin
Other:
NEW: The displays' first pictures
NEW: White glass has been added to Grille's speed cameras.
NEW: Moddesc version raised; CCI 200 light source added
FIX: The display's brightness was adjusted since it was too high.
FIX: Mowers now operate in the proper sequence after combining lifting and lowering with
Resolved: Error in display armrest dark mode optics
FIX: Hella lamps with high beams and an extra light source on the top, together with parking and work lights
The mod has two versions: Physics and Standard Configurations:
NEW: Rear fender warning signals
NEW: Cable in front three-point hitch NEW: RUL left/right/both
NEW: Roof surveillance
NEW: Three different types of wheel weights are available: 1000 kg inside, 2000 kg outside, and 3000 kg inside and out.
NEW: You may choose your wheel weight color.
NEW: Illuminated floor mat
NEW: Precision farming using plant sensors
Interactive controls:
NEW: Full internal and external integration with 55 IC points
Front and rear manual attachment via the "X" IC point
Using an IC to lower the front axle on the exterior of the front axle and inside the PTG controller and roof monitor
Noises for the steering wheel, front axle, front fender, light switch, and doors
Agribumper to conceal
Hood protection cable to conceal animations: NEW: The driving lever is now located on the left. Direction change: The foot pedal is no longer disabled, and the drive lever now moves while braking and accelerating.
NEW: When cruise control is engaged, the drive lever now shifts to the right (only via IC).
NEW: When stationary, the steering column's handbrake lever shifts to "Park," and when moving, it shifts to "Released."
NEW: When changing directions, the steering column's direction lever moves.
NEW: An animated joystick for front loader control
NEW: The steering wheel folds up.
NEW: Warning indicators that fold
NEW: RUL Folding
NEW: Rotating the armrest monitor; NEW: Changing the dark mode; NEW: Retracting the roof monitor
Adjustment for physics: (just for the shop's physics version)
NEW: The seat suspension has been changed; the springs and dampers (chassis) have been adjusted; an inside camera has been installed on the seat;
NEW: Adjusted center of gravity NEW: Adjusted cab suspension
Other:
NEW: The displays' first pictures
NEW: The grille's flasher is now white glass.
NEW: Moddesc version raised; CCI 200 light source added
FIX: The display's brightness was adjusted since it was too high.
FIX: Raising and lowering in conjunction with, say, lawn mowers now operates in the proper sequence.
FIX: The dark mode optics problem in the display armrest has been resolved.
FIX: Hella lamps with high beams and an extra light source on the top, together with parking and work lights
The mod comes in two versions: Physics and Standard
A server with 55 Interactive Control IC points was used to test the addon.
modified tubing for Wienhoff slurry hoses Front suction arm by FreeSight
Turbo-enhanced original sound
PTG tire pressure control system with internal display added by the passenger script (LOOKS ONLY/NO FUNCTION)
Hydraulic fast coupler on the Fendt front loader console
The hood guard's decorative rope (front loader option)
Front axle that may be lowered with sound
Agribumper weight may be adjusted between 400 and 1800 kg.
Configurable primary color (Fendt + Agribumper)
Changeable rim color
Agribumper: Flasher that can be adjusted
Agribumper: Adaptable headlight
Agribumper: Sidelight that can be adjusted
Agribumper: The initial costs
Changing the revolving beacon between the left and right, LED, flasher, or without Adaptable
Daytime operation with adjustable light color
Lemken/Zunhammer/Kuhn/Krone/Amazone/Pöttinger/Horsch/Wienhoff CCI200 terminal
Configurable decorative light
CB radio with adjustable illumination
CB radio wire and antenna with animation
Front and rear windshield Fendt stickers that may be customized in a variety of colors
Show the first pictures
Show the dark mode.
When the lights are on, the mobile phone has a start image and dark mode. The front loader may be adjusted: With and without hood protection, Hauer/Quicke
Customizable beige interior trim color
Realistic shadows are now included in work lights.
There are four types of front flashers in the grill.
The grill's turbo indication
The front K80-K50 ball cover has decorative rope that conceals when anything is fastened.
The rear fender may be either thin, medium, or broad.
Color customization for the rear fender
Configurable warning indicators
Configurable roof monitor
Configurable plant sensors for precision farming
When stopping and accelerating, the drive lever now moves (foot pedal disabled).
When the Wienhoff Freesight is attached and the intake manifold is controlled, the hydraulic control joystick moves.
Physics adjustment: (only accessible in the shop's physics version; not standard)
A camera within the seat
Adjusted seat suspension
Adjusted suspension in the cabin
Chassis dampers and springs were modified.
Elevated center of gravity
Version 1.0.7.6 NEW: A second version with a personalized paint job has been included. There is just one high gloss option (Golden Diamond).
FIX: The regular version's matte paint finish is once again accessible.
FIX: When the color of the seat and interior changes, the original fabric is still used.
FIX: The roof hatch may now be opened with a mouse once again.
Version 1.0.7.5 HOTFIX: Spelling problem in the XML repaired, color selection primary color no longer functional
Version 1.0.7.4 NEW: translation into English
NEW: Moddesc was elevated
FIX: The clear coat and paint reflection now function properly.
FIX: Remapped MouseControl
Version 1.0.7.3
FIX: New Instructions for Hydraulic Schlauchs in the Wienhoff When the HORSCH Fronttank was used, FreeSight caused optical errors.
Version 1.0.7.2
FIX: When the field sprayer is installed, the slurry hoses are not shown correctly. Version 1.0.7.1 FIX: Position of the interior camera
I apologize for the mistake and hope that everything is now back to normal.
Version 1.0.7.0 New: CCI Terminal: Wienhoff for Suction Arm (not yet working due to lacking DBL) New: Adapted Tubing-Slurry Hose for Wienhoff FreeSight Front Suction Arm
NEW: Four Different Types of Front Flashers in Grilles; CCI Terminal Cable in Interior
NEW: Grille Turbo Shield
NEW: Ball Cover for K80-K50 (Hides when applied)
NEW: You Can Change the Color of the Rear Fender
FIX: Brightness of Daytime Running Lights
FIX: All of the paint on certain sections was chrome at 100% damage.
FIX: Redesigned and Enhanced Clarity of Mod Configuration
Important: To prevent issues, if the save game has an earlier version, PLEASE sell the car, take the mod out of the mod folder, put in the new ZIP file (because it's a new file), and buy it again in-game!
Version 1.0.6.0 NEW: Rooftop spinning white LED beacons
NEW: Internal terminal for tire pressure control system
NEW: Front loader option with decorative rope on the hood protection
NEW: Realistic shadows are now present in work lighting.
NEW: A brand-new horn
NEW: A new sound for the indication
FIX: Selecting the CCI terminal is now functional.
FIX: The front display is no longer completely covered in filth.
FIX: The roof's extra headlights are no longer permanently lit.
Version 1.0.5.2 NEW: Fendt front loader console with hydraulic fast coupler Version 1.0.5.3 FIX: Double assignment of mouse control for the driver's door and front loader
Version 1.0.5.1 FIX: The roof hatch double occupancy control was fixed; a new axis was allocated; CCI Horsch was permanently visible; the XML value was incorrect.
V1.0.5 NEW: By holding down the mouse wheel and moving it to the right, the front axle may be lowered audibly.
NEW: You may now freely change the color of the beige inside paneling.
NEW: CCI 200 Horsch soil cultivation display (only fully functional with DBL)
FIX: The parking brake is now only illuminated when beginning, while it was previously constantly lighted in the front display.
Version 1.0.4.1
NEW: CCI Terminal: Yellow loading circle animation at startup.
FIX: All daytime running lights have been redesigned to improve color brightness. Sadly, the blue hue is not particularly vivid since it changes to purple as the light intensity is increased.
I hope that everyone is satisfied with this good compromise. I'm going to keep working on the lights' long-term upgrades.
Version 1.0.4
NEW: Turbocharged original sound
NEW: There are now door noises.
NEW: Start screens for CCI Terminal have been added.
NEW: The Krene, Zunhammer, and Amazone screen themes for the CCI Terminal have been updated.
NEW: Pöttinger screen for CCI Terminal added
FIX: The DBL symbols on the CCI Terminal no longer permanently illuminate
V1.0.3 Shows the first photos
It is possible to design a front loader to display dark mode when the lights are on and to start the image on a mobile phone. With and without hood protection, Hauer/Quicke
Mouse control for the rear window, roof hatch, and left door
Version 1.0.2.0
Agribumper: Adjustable driving light
Agribumper: Adjustable side lights
CB radio with adjustable illumination
CB radio wire and antenna with animation
Hella Configurable extra headlights on top
Configurable orange LED on the mirror
Extra red LEDs on the back roof and the adjustable wide fender outside
LEDs in the indicators, red, and white warning signals
It is now possible to switch between the spinning light and flasher on the Fendt rotating beacon (version 1.0.0.2).
Agribumper's flasher is now selectable.
Version 1.0.0.1
I neglected to remove the i3D's camera.
Thanks to Finanzamt31er
The primary color may be changed. Fendt+Agribumper Color-Customizable Rim
Agribumper: customizable color
Drive lights and a speed camera
Initial costs
Changelog: 1.0.8.0 version
The mod has two versions: Physics and Standard
Configurations:
NEW: Rear fender warning signals
NEW: RUL both left and right
NEW: Three-point hitch cable in front
NEW: Roof surveillance
NEW: Three different types of wheel weights (internal 1000 kg, outside 2000 kg, and inside and outside 3000 kg)
NEW: You may choose your wheel weight color.
NEW: Illuminated floor mat
NEW: Precision farming using plant sensors
Interactive Management:
NEW: Full internal and external integration with 55 IC points
Front and rear manual attachment via the "X" IC point
Lower front axle with IC on the front axle, within the PTG controller, and on the roof monitor
Front axle, steering wheel, light switch, and door sounds
The front fender
For Hide, Agribumper
Keep the hood guard rope hidden.
Animations:
NEW: When changing directions, the drive lever now shifts to the left.
NEW: When braking and accelerating, the drive lever now moves (foot pedal disabled).
NEW: When cruise control is engaged, the drive lever now shifts to the right (only via IC).
NEW: When stationary, the steering column's handbrake lever shifts to "Park," and when moving, it shifts to "Released."
NEW: When changing directions, the steering column's direction lever moves.
NEW: An animated joystick for front loader control
NEW: The steering wheel folds up.
NEW: Warning signs that fold in
NEW: Include RUL.
NEW: Armrest monitor that rotates; NEW: retractable roof monitor
NEW: Change to dark mode
Adjustment for physics: (just for the shop's physics version)
NEW: The seat suspension has been changed; an inside camera has been installed on the seat.
NEW: Chassis dampers and springs have been tweaked
NEW: Repositioned center of gravity
NEW: Adjusted suspension for the cabin
Other:
NEW: The displays' first pictures
NEW: White glass has been added to Grille's speed cameras.
NEW: Moddesc version raised; CCI 200 light source added
FIX: The display's brightness was adjusted since it was too high.
FIX: Mowers now operate in the proper sequence after combining lifting and lowering with
Resolved: Error in display armrest dark mode optics
FIX: Hella lamps with high beams and an extra light source on the top, together with parking and work lights
The mod has two versions: Physics and Standard Configurations:
NEW: Rear fender warning signals
NEW: Cable in front three-point hitch NEW: RUL left/right/both
NEW: Roof surveillance
NEW: Three different types of wheel weights are available: 1000 kg inside, 2000 kg outside, and 3000 kg inside and out.
NEW: You may choose your wheel weight color.
NEW: Illuminated floor mat
NEW: Precision farming using plant sensors
Interactive controls:
NEW: Full internal and external integration with 55 IC points
Front and rear manual attachment via the "X" IC point
Using an IC to lower the front axle on the exterior of the front axle and inside the PTG controller and roof monitor
Noises for the steering wheel, front axle, front fender, light switch, and doors
Agribumper to conceal
Hood protection cable to conceal animations: NEW: The driving lever is now located on the left. Direction change: The foot pedal is no longer disabled, and the drive lever now moves while braking and accelerating.
NEW: When cruise control is engaged, the drive lever now shifts to the right (only via IC).
NEW: When stationary, the steering column's handbrake lever shifts to "Park," and when moving, it shifts to "Released."
NEW: When changing directions, the steering column's direction lever moves.
NEW: An animated joystick for front loader control
NEW: The steering wheel folds up.
NEW: Warning indicators that fold
NEW: RUL Folding
NEW: Rotating the armrest monitor; NEW: Changing the dark mode; NEW: Retracting the roof monitor
Adjustment for physics: (just for the shop's physics version)
NEW: The seat suspension has been changed; the springs and dampers (chassis) have been adjusted; an inside camera has been installed on the seat;
NEW: Adjusted center of gravity NEW: Adjusted cab suspension
Other:
NEW: The displays' first pictures
NEW: The grille's flasher is now white glass.
NEW: Moddesc version raised; CCI 200 light source added
FIX: The display's brightness was adjusted since it was too high.
FIX: Raising and lowering in conjunction with, say, lawn mowers now operates in the proper sequence.
FIX: The dark mode optics problem in the display armrest has been resolved.
FIX: Hella lamps with high beams and an extra light source on the top, together with parking and work lights
The mod comes in two versions: Physics and Standard
A server with 55 Interactive Control IC points was used to test the addon.
modified tubing for Wienhoff slurry hoses Front suction arm by FreeSight
Turbo-enhanced original sound
PTG tire pressure control system with internal display added by the passenger script (LOOKS ONLY/NO FUNCTION)
Hydraulic fast coupler on the Fendt front loader console
The hood guard's decorative rope (front loader option)
Front axle that may be lowered with sound
Agribumper weight may be adjusted between 400 and 1800 kg.
Configurable primary color (Fendt + Agribumper)
Changeable rim color
Agribumper: Flasher that can be adjusted
Agribumper: Adaptable headlight
Agribumper: Sidelight that can be adjusted
Agribumper: The initial costs
Changing the revolving beacon between the left and right, LED, flasher, or without Adaptable
Daytime operation with adjustable light color
Lemken/Zunhammer/Kuhn/Krone/Amazone/Pöttinger/Horsch/Wienhoff CCI200 terminal
Configurable decorative light
CB radio with adjustable illumination
CB radio wire and antenna with animation
Front and rear windshield Fendt stickers that may be customized in a variety of colors
Show the first pictures
Show the dark mode.
When the lights are on, the mobile phone has a start image and dark mode. The front loader may be adjusted: With and without hood protection, Hauer/Quicke
Customizable beige interior trim color
Realistic shadows are now included in work lights.
There are four types of front flashers in the grill.
The grill's turbo indication
The front K80-K50 ball cover has decorative rope that conceals when anything is fastened.
The rear fender may be either thin, medium, or broad.
Color customization for the rear fender
Configurable warning indicators
Configurable roof monitor
Configurable plant sensors for precision farming
When stopping and accelerating, the drive lever now moves (foot pedal disabled).
When the Wienhoff Freesight is attached and the intake manifold is controlled, the hydraulic control joystick moves.
Physics adjustment: (only accessible in the shop's physics version; not standard)
A camera within the seat
Adjusted seat suspension
Adjusted suspension in the cabin
Chassis dampers and springs were modified.
Elevated center of gravity
Version 1.0.7.6 NEW: A second version with a personalized paint job has been included. There is just one high gloss option (Golden Diamond).
FIX: The regular version's matte paint finish is once again accessible.
FIX: When the color of the seat and interior changes, the original fabric is still used.
FIX: The roof hatch may now be opened with a mouse once again.
Version 1.0.7.5 HOTFIX: Spelling problem in the XML repaired, color selection primary color no longer functional
Version 1.0.7.4 NEW: translation into English
NEW: Moddesc was elevated
FIX: The clear coat and paint reflection now function properly.
FIX: Remapped MouseControl
Version 1.0.7.3
FIX: New Instructions for Hydraulic Schlauchs in the Wienhoff When the HORSCH Fronttank was used, FreeSight caused optical errors.
Version 1.0.7.2
FIX: When the field sprayer is installed, the slurry hoses are not shown correctly. Version 1.0.7.1 FIX: Position of the interior camera
I apologize for the mistake and hope that everything is now back to normal.
Version 1.0.7.0 New: CCI Terminal: Wienhoff for Suction Arm (not yet working due to lacking DBL) New: Adapted Tubing-Slurry Hose for Wienhoff FreeSight Front Suction Arm
NEW: Four Different Types of Front Flashers in Grilles; CCI Terminal Cable in Interior
NEW: Grille Turbo Shield
NEW: Ball Cover for K80-K50 (Hides when applied)
NEW: You Can Change the Color of the Rear Fender
FIX: Brightness of Daytime Running Lights
FIX: All of the paint on certain sections was chrome at 100% damage.
FIX: Redesigned and Enhanced Clarity of Mod Configuration
Important: To prevent issues, if the save game has an earlier version, PLEASE sell the car, take the mod out of the mod folder, put in the new ZIP file (because it's a new file), and buy it again in-game!
Version 1.0.6.0 NEW: Rooftop spinning white LED beacons
NEW: Internal terminal for tire pressure control system
NEW: Front loader option with decorative rope on the hood protection
NEW: Realistic shadows are now present in work lighting.
NEW: A brand-new horn
NEW: A new sound for the indication
FIX: Selecting the CCI terminal is now functional.
FIX: The front display is no longer completely covered in filth.
FIX: The roof's extra headlights are no longer permanently lit.
Version 1.0.5.2 NEW: Fendt front loader console with hydraulic fast coupler Version 1.0.5.3 FIX: Double assignment of mouse control for the driver's door and front loader
Version 1.0.5.1 FIX: The roof hatch double occupancy control was fixed; a new axis was allocated; CCI Horsch was permanently visible; the XML value was incorrect.
V1.0.5 NEW: By holding down the mouse wheel and moving it to the right, the front axle may be lowered audibly.
NEW: You may now freely change the color of the beige inside paneling.
NEW: CCI 200 Horsch soil cultivation display (only fully functional with DBL)
FIX: The parking brake is now only illuminated when beginning, while it was previously constantly lighted in the front display.
Version 1.0.4.1
NEW: CCI Terminal: Yellow loading circle animation at startup.
FIX: All daytime running lights have been redesigned to improve color brightness. Sadly, the blue hue is not particularly vivid since it changes to purple as the light intensity is increased.
I hope that everyone is satisfied with this good compromise. I'm going to keep working on the lights' long-term upgrades.
Version 1.0.4
NEW: Turbocharged original sound
NEW: There are now door noises.
NEW: Start screens for CCI Terminal have been added.
NEW: The Krene, Zunhammer, and Amazone screen themes for the CCI Terminal have been updated.
NEW: Pöttinger screen for CCI Terminal added
FIX: The DBL symbols on the CCI Terminal no longer permanently illuminate
V1.0.3 Shows the first photos
It is possible to design a front loader to display dark mode when the lights are on and to start the image on a mobile phone. With and without hood protection, Hauer/Quicke
Mouse control for the rear window, roof hatch, and left door
Version 1.0.2.0
Agribumper: Adjustable driving light
Agribumper: Adjustable side lights
CB radio with adjustable illumination
CB radio wire and antenna with animation
Hella Configurable extra headlights on top
Configurable orange LED on the mirror
Extra red LEDs on the back roof and the adjustable wide fender outside
LEDs in the indicators, red, and white warning signals
It is now possible to switch between the spinning light and flasher on the Fendt rotating beacon (version 1.0.0.2).
Agribumper's flasher is now selectable.
Version 1.0.0.1
I neglected to remove the i3D's camera.
Thanks to Finanzamt31er
Version
v 1.0.7.5
il y a 1 mois
Adjustable Agribumper weight: 400–1800 kg
The primary color may be changed. Fendt+Agribumper Color-Customizable Rim
Agribumper: customizable color
Drive lights and a speed camera
Initial costs
Changelog: Version 1.0.7.4 FIX: Paint reflection/clear coat now functions properly NEW: Moddesc increased NEW: English translation
FIX: Remapped MouseControl
Version 1.0.7.3 FIX: New guidance for hydraulic pumps when using the Wienhoff FreeSight, which caused optical errors when using the HORSCH Fronttank
Version 1.0.7.2 FIX: When the field sprayer is mounted, the slurry hoses are shown incorrectly.
Fix for inside camera location in version 1.0.7.1
I apologize for the mistake and hope that everything is now back to normal.
Version 1.0.7.0 New: CCI Terminal: Wienhoff for Suction Arm (not yet working due to lacking DBL) New: Adapted Tubing-Slurry Hose for Wienhoff FreeSight Front Suction Arm
NEW: Four Different Types of Front Flashers in Grilles; CCI Terminal Cable in Interior
NEW: K80-K50 Ball Cover (Hides when anything is connected) NEW: Turbo Shield in Grille
NEW: You Can Change the Color of the Rear Fender
FIX: Brightness of Daytime Running Lights
FIX: All of the paint on certain sections was chrome at 100% damage.
FIX: Redesigned and Enhanced Clarity of Mod Configuration
Important: To prevent issues, if the save game has an earlier version, PLEASE sell the car, take the mod out of the mod folder, put in the new ZIP file (because it's a new file), and buy it again in-game!
Version 1.0.6.0 New features include: a tire pressure management system with an internal terminal; white LED revolving beacons on the roof; and decorative rope on the hood protection (front loader choices).
NEW: Realistic shadows are now present in work lighting.
NEW: A brand-new horn
NEW: A new sound for the indication
FIX: Selecting the CCI terminal is now functional.
FIX: The front display is no longer completely covered in filth.
FIX: The roof's extra headlights are no longer permanently lit.
Version 1.0.5.3 FIX: Mouse control for the driver's door and front loader is double assigned.
Fendt front loader console with hydraulic fast coupler, version 1.0.5.2 NEW
Version 1.0.5.1
FIX: CCI Horsch was permanently displayed; the XML value was incorrect.
FIX: Double occupancy control of the roof hatch; new axis assigned
V1.0.5 NEW: By holding down the mouse wheel and moving it to the right, the front axle may be lowered audibly.
NEW: You may now freely change the color of the beige inside paneling.
NEW: CCI 200 Horsch soil cultivation display (only fully functional with DBL)
FIX: The parking brake is now only illuminated when beginning, while it was previously constantly lighted in the front display.
Version 1.0.4.1 NEW: CCI Terminal: Yellow loading circle animation at startup.
FIX: All daytime running lights have been redesigned to improve color brightness. Sadly, the blue hue is not particularly vivid since it changes to purple as the light intensity is increased.
I hope that everyone is satisfied with this good compromise. I'm going to keep working on the lights' long-term upgrades.
V1.0.4 NEW: Turbo-enhanced original sound
NEW: CCI Terminal start screens have been added. NEW: Door noises have been added.
NEW: The Krene, Zunhammer, and Amazone screen themes for the CCI Terminal have been updated.
NEW: Pöttinger screen for CCI Terminal added
FIX: The DBL symbols on the CCI Terminal no longer permanently illuminate
Version 1.0.3
Show the first pictures
When the lights are on, the mobile device may be set up to display the dark mode and the start picture.
The front loader may be set up as follows: With and without hood protection, Hauer/Quicke
Mouse control for the rear window, roof hatch, and left door
Version 1.0.2.0
Agribumper: Adjustable driving light
Agribumper: Adjustable side lights
CB radio with adjustable illumination
Animated wire and antenna for a CB radio Configurable extra headlights on top
Configurable orange LED on the mirror
There is an extra red LED on the back roof, and the broad fender outside has a red, white, and indication LED that may be adjusted.
It is now possible to switch between the spinning light and flasher on the Fendt rotating beacon (version 1.0.0.2).
Agribumper's flasher is now selectable.
Version 1.0.0.1 The camera in the i3D was not deleted.
Thanks to Finanzamt31er
The primary color may be changed. Fendt+Agribumper Color-Customizable Rim
Agribumper: customizable color
Drive lights and a speed camera
Initial costs
Changelog: Version 1.0.7.4 FIX: Paint reflection/clear coat now functions properly NEW: Moddesc increased NEW: English translation
FIX: Remapped MouseControl
Version 1.0.7.3 FIX: New guidance for hydraulic pumps when using the Wienhoff FreeSight, which caused optical errors when using the HORSCH Fronttank
Version 1.0.7.2 FIX: When the field sprayer is mounted, the slurry hoses are shown incorrectly.
Fix for inside camera location in version 1.0.7.1
I apologize for the mistake and hope that everything is now back to normal.
Version 1.0.7.0 New: CCI Terminal: Wienhoff for Suction Arm (not yet working due to lacking DBL) New: Adapted Tubing-Slurry Hose for Wienhoff FreeSight Front Suction Arm
NEW: Four Different Types of Front Flashers in Grilles; CCI Terminal Cable in Interior
NEW: K80-K50 Ball Cover (Hides when anything is connected) NEW: Turbo Shield in Grille
NEW: You Can Change the Color of the Rear Fender
FIX: Brightness of Daytime Running Lights
FIX: All of the paint on certain sections was chrome at 100% damage.
FIX: Redesigned and Enhanced Clarity of Mod Configuration
Important: To prevent issues, if the save game has an earlier version, PLEASE sell the car, take the mod out of the mod folder, put in the new ZIP file (because it's a new file), and buy it again in-game!
Version 1.0.6.0 New features include: a tire pressure management system with an internal terminal; white LED revolving beacons on the roof; and decorative rope on the hood protection (front loader choices).
NEW: Realistic shadows are now present in work lighting.
NEW: A brand-new horn
NEW: A new sound for the indication
FIX: Selecting the CCI terminal is now functional.
FIX: The front display is no longer completely covered in filth.
FIX: The roof's extra headlights are no longer permanently lit.
Version 1.0.5.3 FIX: Mouse control for the driver's door and front loader is double assigned.
Fendt front loader console with hydraulic fast coupler, version 1.0.5.2 NEW
Version 1.0.5.1
FIX: CCI Horsch was permanently displayed; the XML value was incorrect.
FIX: Double occupancy control of the roof hatch; new axis assigned
V1.0.5 NEW: By holding down the mouse wheel and moving it to the right, the front axle may be lowered audibly.
NEW: You may now freely change the color of the beige inside paneling.
NEW: CCI 200 Horsch soil cultivation display (only fully functional with DBL)
FIX: The parking brake is now only illuminated when beginning, while it was previously constantly lighted in the front display.
Version 1.0.4.1 NEW: CCI Terminal: Yellow loading circle animation at startup.
FIX: All daytime running lights have been redesigned to improve color brightness. Sadly, the blue hue is not particularly vivid since it changes to purple as the light intensity is increased.
I hope that everyone is satisfied with this good compromise. I'm going to keep working on the lights' long-term upgrades.
V1.0.4 NEW: Turbo-enhanced original sound
NEW: CCI Terminal start screens have been added. NEW: Door noises have been added.
NEW: The Krene, Zunhammer, and Amazone screen themes for the CCI Terminal have been updated.
NEW: Pöttinger screen for CCI Terminal added
FIX: The DBL symbols on the CCI Terminal no longer permanently illuminate
Version 1.0.3
Show the first pictures
When the lights are on, the mobile device may be set up to display the dark mode and the start picture.
The front loader may be set up as follows: With and without hood protection, Hauer/Quicke
Mouse control for the rear window, roof hatch, and left door
Version 1.0.2.0
Agribumper: Adjustable driving light
Agribumper: Adjustable side lights
CB radio with adjustable illumination
Animated wire and antenna for a CB radio Configurable extra headlights on top
Configurable orange LED on the mirror
There is an extra red LED on the back roof, and the broad fender outside has a red, white, and indication LED that may be adjusted.
It is now possible to switch between the spinning light and flasher on the Fendt rotating beacon (version 1.0.0.2).
Agribumper's flasher is now selectable.
Version 1.0.0.1 The camera in the i3D was not deleted.
Thanks to Finanzamt31er
Version
v 1.0.7
il y a 1 mois
Poids réglable de l'Agribumper : 400-1800 kg
La couleur primaire peut être modifiée. Fendt+Agribumper Couleur-Jante personnalisable
Agribumper : couleur personnalisable
Feux de route et radar
Coûts initiaux
Changelog : Version 1.0.7.0 Nouveau : CCI Terminal : Wienhoff pour le bras d'aspiration (pas encore opérationnel car le DBL est nécessaire) Nouveau : Tuyau adapté pour le bras d'aspiration avant Wienhoff FreeSight
NOUVEAU : Quatre types différents de clignotants avant dans les grilles ; câble terminal CCI à l'intérieur
NOUVEAU : Bouclier turbo pour la grille
NOUVEAU : Cache-boule pour K80-K50 (se cache lorsqu'il est appliqué)
NOUVEAU : Possibilité de changer la couleur de l'aile arrière
FIXE : Luminosité des feux de jour
FIXE : Toute la peinture de certaines sections était chromée à 100%.
CORRECTIF : Configuration de la modélisation redessinée et plus claire.
Important : pour éviter tout problème, si la sauvegarde contient une version antérieure, veuillez vendre la voiture, retirer le mod du dossier des mods, insérer le nouveau fichier ZIP (car il s'agit d'un nouveau fichier) et l'acheter à nouveau dans le jeu !
Version 1.0.6.0 NOUVEAU : Balises LED blanches tournantes sur les toits
NOUVEAU : Les éclairages de travail ont maintenant des ombres réalistes ; NOUVEAU : Corde décorative sur la protection du capot (option chargeur frontal) ; NOUVEAU : Système de contrôle de la pression des pneus avec terminal à l'intérieur
NOUVEAU : Un tout nouveau klaxon
NOUVEAU : Un nouveau son pour l'indication
FIXE : La sélection du terminal CCI est maintenant fonctionnelle FIXE : L'écran avant n'est plus complètement recouvert de saleté FIXE : Les lampes supplémentaires sur le toit ne s'allument plus en continu
Nouveau : Console de chargeur frontal Fendt avec attache rapide hydraulique Version 1.0.5.1 FIXE : CCI Horsch était affiché en permanence - valeur incorrecte dans XML Version 1.0.5.3 FIXE : La commande de la souris était affectée en double à la porte du conducteur et au chargeur frontal Version 1.0.5.2
CORRECTIF : Double contrôle de l'occupation de la trappe de toit ; nouvel axe assigné
V1.0.5 NOUVEAU : En maintenant la molette de la souris enfoncée et en la déplaçant vers la droite, l'essieu avant peut être abaissé de manière audible.
NOUVEAU : Vous pouvez désormais modifier librement la couleur des panneaux intérieurs beiges.
NOUVEAU : Affichage du travail du sol CCI 200 Horsch (seulement entièrement fonctionnel avec DBL)
CORRECTIF : Le frein de stationnement ne s'allume plus qu'au démarrage, alors qu'il était auparavant constamment allumé sur l'écran avant.
Version 1.0.4.1
NOUVEAU : CCI Terminal : Animation du cercle de chargement jaune au démarrage.
CORRECTIF : Tous les feux diurnes ont été redessinés pour améliorer la luminosité des couleurs. Malheureusement, la teinte bleue n'est pas particulièrement vive puisqu'elle vire au violet lorsque l'intensité lumineuse augmente.
J'espère que tout le monde est satisfait de ce bon compromis. Je vais continuer à travailler sur les améliorations à long terme des lumières.
V1.0.4 NOUVEAU : Le son d'origine a été amélioré.
NOUVEAU : Il y a maintenant des bruits de porte.
NOUVEAU : Des écrans de démarrage pour CCI Terminal ont été ajoutés.
NOUVEAU : Les thèmes des écrans Krene, Zunhammer et Amazone pour le CCI Terminal ont été mis à jour.
NOUVEAU : Ajout de l'écran Pöttinger pour le terminal CCI.
CORRECTIF : Les symboles DBL sur le terminal CCI ne s'allument plus en permanence.
La V1.0.3 présente les premières photos
Il est possible de concevoir un chargeur frontal pour afficher le mode sombre lorsque les lumières sont allumées et de lancer l'image sur un téléphone portable. Avec et sans protection de capot, Hauer/Quicke
Commande à la souris de la lunette arrière, du toit ouvrant et de la porte gauche
Version 1.0.2.0
Agribumper : Feu de route réglable
Agribumper : Feux latéraux réglables
Radio CB avec éclairage réglable
Fil et antenne de radio CB avec animation
Phares supplémentaires configurables Hella sur le dessus
LED orange configurable sur le rétroviseur
Il y a une LED rouge supplémentaire sur le toit arrière, et l'aile large à l'extérieur a une LED rouge, blanche et d'indication qui peut être ajustée.
Version 1.0.0.2
Il est maintenant possible de commuter entre le feu tournant et le clignotant sur le gyrophare Fendt.
Le clignotant d'Agribumper est maintenant sélectionnable.
Version 1.0.0.1
J'ai oublié de supprimer la caméra de l'i3D.
Merci à Finanzamt31er
La couleur primaire peut être modifiée. Fendt+Agribumper Couleur-Jante personnalisable
Agribumper : couleur personnalisable
Feux de route et radar
Coûts initiaux
Changelog : Version 1.0.7.0 Nouveau : CCI Terminal : Wienhoff pour le bras d'aspiration (pas encore opérationnel car le DBL est nécessaire) Nouveau : Tuyau adapté pour le bras d'aspiration avant Wienhoff FreeSight
NOUVEAU : Quatre types différents de clignotants avant dans les grilles ; câble terminal CCI à l'intérieur
NOUVEAU : Bouclier turbo pour la grille
NOUVEAU : Cache-boule pour K80-K50 (se cache lorsqu'il est appliqué)
NOUVEAU : Possibilité de changer la couleur de l'aile arrière
FIXE : Luminosité des feux de jour
FIXE : Toute la peinture de certaines sections était chromée à 100%.
CORRECTIF : Configuration de la modélisation redessinée et plus claire.
Important : pour éviter tout problème, si la sauvegarde contient une version antérieure, veuillez vendre la voiture, retirer le mod du dossier des mods, insérer le nouveau fichier ZIP (car il s'agit d'un nouveau fichier) et l'acheter à nouveau dans le jeu !
Version 1.0.6.0 NOUVEAU : Balises LED blanches tournantes sur les toits
NOUVEAU : Les éclairages de travail ont maintenant des ombres réalistes ; NOUVEAU : Corde décorative sur la protection du capot (option chargeur frontal) ; NOUVEAU : Système de contrôle de la pression des pneus avec terminal à l'intérieur
NOUVEAU : Un tout nouveau klaxon
NOUVEAU : Un nouveau son pour l'indication
FIXE : La sélection du terminal CCI est maintenant fonctionnelle FIXE : L'écran avant n'est plus complètement recouvert de saleté FIXE : Les lampes supplémentaires sur le toit ne s'allument plus en continu
Nouveau : Console de chargeur frontal Fendt avec attache rapide hydraulique Version 1.0.5.1 FIXE : CCI Horsch était affiché en permanence - valeur incorrecte dans XML Version 1.0.5.3 FIXE : La commande de la souris était affectée en double à la porte du conducteur et au chargeur frontal Version 1.0.5.2
CORRECTIF : Double contrôle de l'occupation de la trappe de toit ; nouvel axe assigné
V1.0.5 NOUVEAU : En maintenant la molette de la souris enfoncée et en la déplaçant vers la droite, l'essieu avant peut être abaissé de manière audible.
NOUVEAU : Vous pouvez désormais modifier librement la couleur des panneaux intérieurs beiges.
NOUVEAU : Affichage du travail du sol CCI 200 Horsch (seulement entièrement fonctionnel avec DBL)
CORRECTIF : Le frein de stationnement ne s'allume plus qu'au démarrage, alors qu'il était auparavant constamment allumé sur l'écran avant.
Version 1.0.4.1
NOUVEAU : CCI Terminal : Animation du cercle de chargement jaune au démarrage.
CORRECTIF : Tous les feux diurnes ont été redessinés pour améliorer la luminosité des couleurs. Malheureusement, la teinte bleue n'est pas particulièrement vive puisqu'elle vire au violet lorsque l'intensité lumineuse augmente.
J'espère que tout le monde est satisfait de ce bon compromis. Je vais continuer à travailler sur les améliorations à long terme des lumières.
V1.0.4 NOUVEAU : Le son d'origine a été amélioré.
NOUVEAU : Il y a maintenant des bruits de porte.
NOUVEAU : Des écrans de démarrage pour CCI Terminal ont été ajoutés.
NOUVEAU : Les thèmes des écrans Krene, Zunhammer et Amazone pour le CCI Terminal ont été mis à jour.
NOUVEAU : Ajout de l'écran Pöttinger pour le terminal CCI.
CORRECTIF : Les symboles DBL sur le terminal CCI ne s'allument plus en permanence.
La V1.0.3 présente les premières photos
Il est possible de concevoir un chargeur frontal pour afficher le mode sombre lorsque les lumières sont allumées et de lancer l'image sur un téléphone portable. Avec et sans protection de capot, Hauer/Quicke
Commande à la souris de la lunette arrière, du toit ouvrant et de la porte gauche
Version 1.0.2.0
Agribumper : Feu de route réglable
Agribumper : Feux latéraux réglables
Radio CB avec éclairage réglable
Fil et antenne de radio CB avec animation
Phares supplémentaires configurables Hella sur le dessus
LED orange configurable sur le rétroviseur
Il y a une LED rouge supplémentaire sur le toit arrière, et l'aile large à l'extérieur a une LED rouge, blanche et d'indication qui peut être ajustée.
Version 1.0.0.2
Il est maintenant possible de commuter entre le feu tournant et le clignotant sur le gyrophare Fendt.
Le clignotant d'Agribumper est maintenant sélectionnable.
Version 1.0.0.1
J'ai oublié de supprimer la caméra de l'i3D.
Merci à Finanzamt31er
Version
v 1.0.5.3
il y a 3 mois
Poids de l'Agribumper configurable 400-1800kg
Couleur principale configurable Fendt+Agribumper
Couleur de la jante configurable
Agribumper : couleur configurable
Radar et feux de route
Prix originaux
Changelog :
Version 1.0.5.3
FIXE : Double assignation du contrôle de la souris - porte du conducteur et chargeur frontal
Version 1.0.5.2
NOUVEAU : Console pour chargeur frontal Fendt avec attache rapide hydraulique
Version 1.0.5.1
FIXE : CCI Horsch était visible en permanence - valeur erronée dans XML
FIXE : Contrôle de la trappe de toit en double occupation - nouvel axe assigné
V1.0.5
NOUVEAU : L'essieu avant peut être abaissé avec le son (maintenir la molette de la souris enfoncée et la déplacer vers la droite)
NOUVEAU : Les panneaux intérieurs (beige) peuvent maintenant être personnalisés en couleur.
NOUVEAU : Affichage CCI 200 Horsch pour le travail du sol (fonction complète uniquement avec DBL)
CORRECTIF : Le frein de stationnement est toujours allumé dans l'affichage avant (ne s'allume plus qu'au démarrage).
Version 1.0.4.1
NOUVEAU : CCI Terminal : Animation lors du démarrage (cercle de chargement jaune).
FIXE : Les feux diurnes ont été entièrement reconstruits pour une meilleure luminosité des couleurs. Malheureusement, la couleur bleue n'est pas très lumineuse, car elle devient violette lorsque la lumière est plus intense.
J'ESPÈRE QU'IL S'AGIT D'UN BON COMPROMIS QUI SATISFERA TOUT LE MONDE. Je vais continuer à travailler sur des améliorations à long terme pour les lumières.
V1.0.4
NOUVEAU : Son original avec turbo
NOUVEAU : Ajout du son des portes
NOUVEAU : Ajout des écrans de démarrage du terminal CCI
NOUVEAU : révision des motifs des écrans du CCI Terminal (Krone/Zunhammer/Amazone)
NOUVEAU : Ajout de l'écran CCI Terminal Pöttinger
CORRECTIF : les symboles DBL du CCI Terminal ne s'allument plus en permanence
V1.0.3
Affichage des images de démarrage
Affichage du mode sombre lorsque les lumières sont allumées
Le téléphone portable peut être configuré avec une image de démarrage et un mode sombre lorsque les lumières sont allumées.
Le chargeur frontal peut être configuré : Hauer/Quicke avec ou sans protection du capot
Contrôle à la souris : porte gauche, trappe de toit et vitre arrière
Version 1.0.2.0
Agribumper : Feu de route configurable
Agribumper : Feu latéral configurable
Radio CB avec éclairage configurable
Antenne et câble animés pour radio CB
Phares additionnels Hella Top configurables
LED orange sur le rétroviseur configurable
LED rouge supplémentaire sur le toit arrière et l'aile large à l'extérieur configurable
LED dans les panneaux d'avertissement : blanc, rouge et indicateurs
Version 1.0.0.2
Le gyrophare Fendt peut maintenant être configuré entre le gyrophare et le clignotant
Le clignotant de l'Agribumper peut maintenant être sélectionné
Version 1.0.0.1
Oubli de la suppression de la caméra dans l'i3d.
Crédits :
Finanzamt31er
Couleur principale configurable Fendt+Agribumper
Couleur de la jante configurable
Agribumper : couleur configurable
Radar et feux de route
Prix originaux
Changelog :
Version 1.0.5.3
FIXE : Double assignation du contrôle de la souris - porte du conducteur et chargeur frontal
Version 1.0.5.2
NOUVEAU : Console pour chargeur frontal Fendt avec attache rapide hydraulique
Version 1.0.5.1
FIXE : CCI Horsch était visible en permanence - valeur erronée dans XML
FIXE : Contrôle de la trappe de toit en double occupation - nouvel axe assigné
V1.0.5
NOUVEAU : L'essieu avant peut être abaissé avec le son (maintenir la molette de la souris enfoncée et la déplacer vers la droite)
NOUVEAU : Les panneaux intérieurs (beige) peuvent maintenant être personnalisés en couleur.
NOUVEAU : Affichage CCI 200 Horsch pour le travail du sol (fonction complète uniquement avec DBL)
CORRECTIF : Le frein de stationnement est toujours allumé dans l'affichage avant (ne s'allume plus qu'au démarrage).
Version 1.0.4.1
NOUVEAU : CCI Terminal : Animation lors du démarrage (cercle de chargement jaune).
FIXE : Les feux diurnes ont été entièrement reconstruits pour une meilleure luminosité des couleurs. Malheureusement, la couleur bleue n'est pas très lumineuse, car elle devient violette lorsque la lumière est plus intense.
J'ESPÈRE QU'IL S'AGIT D'UN BON COMPROMIS QUI SATISFERA TOUT LE MONDE. Je vais continuer à travailler sur des améliorations à long terme pour les lumières.
V1.0.4
NOUVEAU : Son original avec turbo
NOUVEAU : Ajout du son des portes
NOUVEAU : Ajout des écrans de démarrage du terminal CCI
NOUVEAU : révision des motifs des écrans du CCI Terminal (Krone/Zunhammer/Amazone)
NOUVEAU : Ajout de l'écran CCI Terminal Pöttinger
CORRECTIF : les symboles DBL du CCI Terminal ne s'allument plus en permanence
V1.0.3
Affichage des images de démarrage
Affichage du mode sombre lorsque les lumières sont allumées
Le téléphone portable peut être configuré avec une image de démarrage et un mode sombre lorsque les lumières sont allumées.
Le chargeur frontal peut être configuré : Hauer/Quicke avec ou sans protection du capot
Contrôle à la souris : porte gauche, trappe de toit et vitre arrière
Version 1.0.2.0
Agribumper : Feu de route configurable
Agribumper : Feu latéral configurable
Radio CB avec éclairage configurable
Antenne et câble animés pour radio CB
Phares additionnels Hella Top configurables
LED orange sur le rétroviseur configurable
LED rouge supplémentaire sur le toit arrière et l'aile large à l'extérieur configurable
LED dans les panneaux d'avertissement : blanc, rouge et indicateurs
Version 1.0.0.2
Le gyrophare Fendt peut maintenant être configuré entre le gyrophare et le clignotant
Le clignotant de l'Agribumper peut maintenant être sélectionné
Version 1.0.0.1
Oubli de la suppression de la caméra dans l'i3d.
Crédits :
Finanzamt31er
À propos de Mod
Dernière version | v 1.0.8 |
Jeu | FS25 |
Catégorie | Véhicules » Tracteurs » Moyen |
Tags | Fendt |
Téléchargements | 225 |
Créé | il y a 4 mois |
Dernière mise à jour | il y a 6 jours |